Introduction 
 Our sales of micro-thermal regeneration of compressed air dryer reached the advanced level of energy-saving products. This series sets a heat of regeneration and non-thermal regeneration of the advantages of the re-heating in the form of micro gas, thereby reducing gas consumption and then, to save energy. It avoids the non-heat regeneration dryer switching time is short, the shortcomings of large amount of recycled air loss, while avoiding the hot air drying machine renewable energy loss big shortcoming. The dryer has a switching time is reasonable, then less gas consumption, is the purification of the industry's most energy-efficient economy, the adsorption dryer is widely used in metallurgy, electric power, electronics, food, chemical, petroleum, pharmaceutical, textile, tobacco, instruments, automatic control and other industries. 
 Process 
 A, B adsorption tower 
 3,4,6,7 valve 
 5 Muffler 
 8 throttle 
 9 program controller 
 10 electric heater 
 A1, A2, B1, B2 switching valve 
 Working conditions and technical specifications: 

 Pressure dew point ≤ -40 ℃ ~ -70 ℃ 
 Inlet temperature 0 ~ 45 ℃ 
 Working pressure 0.6 ~ 1.0Mpa 
 Activated alumina and molecular sieve desiccant 
 Work continuously alternating the two adsorption tube 
 Control computer program control 
 Inlet oil content ≤ 0.01ppm 
 Regeneration gas ≤ 4 ~ 6% 
 Micro-renewable way to heat regeneration 
 Period T = 120 ~ 480 分钟 
 Indoor installation, no basis 

 Micro heat regenerated adsorption compressed air dryer - Model specifications and performance parameters: 

 Model HSD-1MXF HSD-2MXF HSD-3MXF HSD-6MXF HSD-8MXF HSD-10MXF HSD-13MXF HSD-15MXF HSD-20MXF 
 Air-handling capacity (Nm3/min) 1.2 2.4 3.6 6.5 8.5 11 13.8 17 22 
 Heater power 112,223,344 
 Air over caliber ZG 1 "ZG 1" ZG1 1 / 2 "ZG2" ZG2 "DN65 DN65 DN80 DN80 
 Net weight (kg) 190 240 390 550 620 910 1060 1060 1420 
 Dimensions mm (L * W * H) 700 * 370 

 * 1490 
 700 * 370 

 * 1590 
 850 * 470 

 * 1650 
 1000 * 570 

 * 1965 
 1100 * 570 

 * 2000 
 1250 * 620 

 * 2100 
 1250 * 620 

 * 2100 
 1250 * 620 

 * 2170 
 1250 * 745 

 * 2440 



 Model HSD-25MXF HSD-30MXF HSD-40MXF HSD-50MXF HSD-60MXF HSD-80MXF HSD-100MXF HSD-150MXF HSD-200MXF 
 Air-handling capacity (Nm3/min) 27 32 42 55 65 85 110 160 210 
 Heater power 446,688,101,535 
 Air over bore DN80 DN100 DN100 DN100 DN100 DN150 DN150 DN200 DN200 
 Net weight (kg) 1630 2100 2600 3100 3700 4600 5200 7800 8200 
 Dimensions mm (L * W * H) 1280 * 745 

 * 2440 
 1300 * 745 

 * 2595 
 1400 * 915 

 * 2595 
 1840 * 1075 

 * 2595 
 1840 * 1075 

 * 2595 
 2230 * 1265 

 * 2595 
 2800 * 1265 

 * 3200 
 2800 * 1320 

 * 3200 
 3200 * 1530 

 * 3600